LEDautomotive.com

  • LED Technology

    LEDs are the future of automotive lighting. We do our best to stay on top of the latest LED technology to bring you the best, brightest LEDs available.
  • Automotive Kits

    There are multiple LEDs that will fit a particular application. We test each type of LED to ensure that that we offer the best possible solution for your needs.
  • Eco-friendly

    LEDs are better for the environment than regular bulbs. They use less energy and do not contain any hazardous materials or gasses..
  • LED Types

    Our LED lamps utilize standard miniature, high flux, high powered and ultra high powered LEDs.
  • Multiple Colors

    We offer 4 main colors to choose from. Most of our LED lamps come in white, blue, red and green colors.

Cart  

(empty)
ODOMETER INSTALLATION GUIDE
98-02 Honda Accord

*Please read this all the way through before doing this install!*
We will not be held responsible for any mistakes, problems, or damage done to any part of your car. Follow this install guide carefully, and you should have no problems. If you are unsure about ANYTHING, please email us. We will help you out to the best of our ability.

Here Is What You Will Need:
- Phillips head screw driver

First remove the 2 screws on the under side of the top of the trim piece and pull the trim piece off. (It is held in with 2 clips on the bottom corners)

Next remove the 4 screws that hold in the gauge cluster and tilt if forward to disconnect the wire harnesses.


Once the gauge cluster is removed, look at the back of it. The blue arrow points to the bulb holder that lights up the odometer.


Turn the bulb holder 1/4 of a turn counter clock wise, and then pull it straight out. Remove the bulb, and insert the Wedge LED into the bulb holder. Put the assembly back into the cluster, and put the cluster back in the car.


Connect the connectors to the cluster, and test to see if the odometer lights up. (Turn the key into the on position.) If it does not light up, simply rotate the LED 180 degrees and test again. The best way to rotate it is:
1. Unlock the LED and plastic base - approx 1/4 turn counter clockwise so it can be removed.
2. Pull the LED and base out of the hole just enough to turn it 1/2 a turn (180 degrees)
3. Put it back in the hole
4. Twist it to lock it in (approx 1/4 turn clockwise).


Put everything back together.

HomeHome